Skip to main content
Already have a quote from another company? We'll review it free — no obligation. Get a Free 2nd Opinion
Learn

Why Is My Heat Pump Using Emergency Heat During a Deep Freeze?

Wondering why is my heat pump using emergency heat during a freeze? Get clear answers on when auxiliary heating is normal and when to schedule a repair.

Is Your Thermostat's Emergency Heat Setting a Cause for Concern?

Are you suddenly wondering why is my heat pump using emergency heat just as the first major late fall deep freeze settles over the region? At Mankato Heating & Cooling, this is a common scenario that causes immediate anxiety for many homeowners as they prep their homes for the holiday season. You walk past your hallway thermostat, glance at the display, and see the words "Emergency Heat" or "Aux Heat" illuminated on the screen. Because the word "emergency" implies a critical failure, your first instinct might be to assume the compressor has broken down and you are about to face a freezing house.

Whether you need routine heat pump and cooling system services or professional heat pump and system repair, understanding your system's automatic notifications is the first step to maintaining a comfortable home and peace of mind.

Here is the reality our technicians share with customers every November: heat pumps are incredibly sophisticated pieces of equipment designed as part of comprehensive HVAC setups. They are programmed to automatically adjust to extreme weather fluctuations. In the vast majority of cases, seeing a supplemental heating notification on your thermostat during a severe cold snap is not a sign of a mechanical crisis. Instead, it is a built-in safety net activating exactly as it was designed to do.

To understand why your thermostat is displaying this message, we have to look at how air-source heat pumps gather thermal energy. Unlike a traditional furnace that consumes fuel to create a flame and generate heat, a heat pump absorbs existing ambient heat from the outside air, compresses it to raise its temperature, and transfers it inside your home. This process is highly efficient during mild weather, but it requires supplemental support when the outdoor air loses too much thermal energy.

If you are staring at an unexpected warning on your thermostat, take a deep breath. The system is likely orchestrating a planned, mechanical transition to keep your indoor living space warm while protecting the outdoor compressor from unnecessary wear and tear. Let us break down exactly what the equipment is doing behind the scenes.

Understanding Heat Pump Balance Points in Extreme Cold

To truly grasp why your heating system requires a secondary heat source, you need to understand the technical concept of a "balance point." In our experience servicing the Mankato area, reaching a balance point is a standard occurrence in northern climates, and understanding it shifts the perspective from fearing a system failure to recognizing expected winter operation.

What Exactly Is a Balance Point?

A balance point is the specific outdoor temperature at which your heat pump can no longer extract enough ambient thermal energy to meet the heating demands of your home on its own. For most modern air-source heat pumps, this thermal balance point typically falls somewhere between 25°F and 35°F, depending on the size of your unit, the insulation of your house, and the specific model's efficiency ratings.

When you experience outdoor temperatures dropping below 30°F, the heat pump naturally loses its primary heating efficiency. There is still thermal energy in the air at 30 degrees, but extracting it, compressing it, and transferring it indoors takes significantly more mechanical effort. The compressor has to run longer and work harder to achieve the same indoor temperature that it could easily maintain on a mild 45-degree day.

The Automatic Transition

Your HVAC system is equipped with sensors that constantly monitor both the indoor ambient temperature and the outdoor conditions. When the system recognizes that the heat pump is running continuously without successfully raising the indoor temperature to your thermostat's setpoint, it hits the balance point threshold. At this exact moment, the system automatically activates its secondary heating source to bridge the gap.

This transition is a planned, mechanical feature. The system essentially realizes, "I cannot keep up with this extreme cold using the compressor alone, so I am going to call for backup." By bringing in supplemental heat, the system ensures your home remains comfortable without forcing the outdoor unit to run itself into premature failure.

Thermal vs. Economic Balance Points

HVAC professionals often look at two different types of balance points during system installation and calibration:

  • The Thermal Balance Point: The exact temperature where the heat pump's maximum heat output perfectly matches the heat loss of your home. Below this point, the indoor temperature will slowly drop unless backup heat engages.
  • The Economic Balance Point: The temperature at which it becomes more energy-efficient to switch over entirely to a secondary heat source (like a gas furnace) rather than continuing to run the electric heat pump compressor.

During a late fall or early winter deep freeze, your system is actively managing these balance points to optimize both your indoor comfort and your overall energy consumption. The notification on your wall is simply the system's way of telling you that the backup heat has been deployed.

Auxiliary Heat vs. Emergency Heat: What Is the Difference?

One of the most common sources of homeowner confusion is the terminology used on thermostats. While "Auxiliary Heat" and "Emergency Heat" both refer to secondary heating sources, they operate under completely different circumstances and serve different purposes.

The Automatic Bridge: Auxiliary Heat

Auxiliary (Aux) heat is an automatic process. When the outdoor temperature falls below the balance point, or if you manually increase the thermostat setting by more than two or three degrees at once, the system automatically turns on the Aux heat to help the heat pump reach the target temperature. In this mode, the heat pump compressor continues to run, and the auxiliary heat runs alongside it to provide a necessary boost.

The Manual Override: Emergency Heat

Emergency heat, on the other hand, is typically a manual override setting selected by the user. When you physically switch your thermostat to "Emergency" or "EM Heat," you are telling the system to completely shut down the outdoor heat pump compressor and rely 100% on the backup heating source. This setting should only be used if a tree branch falls on your outdoor unit, the compressor fails, or the outdoor unit becomes entirely encased in a solid block of ice that the defrost cycle cannot melt.

Comparing the Two Heating Modes

Feature Auxiliary Heat (Aux) Emergency Heat (EM)
Activation Method Automatic (controlled by system sensors) Manual (selected by the homeowner)
Heat Pump Status Continues running alongside the backup heat Completely bypassed and shut down
Primary Purpose Bridge the temperature gap during extreme cold Provide heat when the outdoor unit is broken
Energy Consumption Moderate (optimizes both heat sources) High (relies entirely on the backup source)
Cause for Alarm? No, normal during a deep freeze Yes, indicates a need for professional repair

If "Aux Heat" appears on your thermostat during a late fall deep freeze, you can rest easy knowing this is normal. However, manually switching to "Emergency Heat" should be reserved for specific situations where the outdoor unit is compromised.

Auxiliary Heat vs. Emergency Heat
Auxiliary Heat vs. Emergency Heat

How Dual-Fuel Systems Handle Backup Heating

The way your system handles backup heating depends entirely on the type of equipment installed in your home. In severe northern climates, relying solely on an electric heat pump with electric resistance strip heating is often inefficient. That is why our team at Mankato Heating & Cooling typically recommends and installs dual-fuel setups as the standard configuration for surviving harsh Minnesota winters efficiently.

The Anatomy of a Dual-Fuel Setup

A dual-fuel system pairs an electric air-source heat pump with a high-efficiency gas furnace. During mild autumn or spring weather, the heat pump handles all the heating duties, providing highly efficient, gentle warmth by extracting ambient heat from the outside air.

However, when you face outdoor temperatures dropping below 30°F, the system's logic board orchestrates a seamless handoff. Because extracting heat from freezing air takes too much electricity, the system shuts down the heat pump compressor and activates the gas furnace. The furnace then takes over as the sole primary heat source until the outdoor temperature rises back above the economic balance point.

If you want to understand more about how heat pumps perform in Minnesota winters, looking at dual-fuel integration is the key. Our local expertise in Minnesota-specific heat pump and dual-fuel configurations ensures that these systems are calibrated perfectly for the region's specific climate extremes. Upgrading to a high-efficiency dual-fuel system may even qualify for federal tax credits or utility incentive programs, though we always advise homeowners to verify current qualifying programs with their utility provider or a tax professional.

Contrasting Dual-Fuel with Electric Strip Heating

If you do not have a gas furnace, your heat pump likely relies on electric resistance strip heaters for auxiliary and emergency heat. These strips function much like the glowing coils inside a toaster. When the heat pump needs help, massive amounts of electricity are pushed through these coils to generate heat.

While electric strips are effective at warming a house, they consume a tremendous amount of electrical energy. This is why dual-fuel systems are highly recommended in cold regions. A high-efficiency gas furnace can generate intense, rapid heat during a blizzard much more efficiently than electric resistance strips can.

Regardless of whether your backup heat is a gas furnace or electric strips, the important takeaway is that the system automatically orchestrates this switch for optimal comfort and energy use. You do not need to manually intervene when the temperature plummets.

When to Keep It Running and When to Call a Professional

While temporary auxiliary heating during a cold snap is completely normal and should be left alone to do its job, there are certain indicators that signal a true malfunction. In our years of keeping Mankato homes warm, we have learned that knowing the difference between normal winter operation and a mechanical failure can save you from unnecessary service calls or, conversely, prevent severe damage to your equipment.

Normal Operations You Can Ignore

  • Short bursts of Aux Heat: If the Aux indicator turns on for 20-30 minutes during a particularly cold morning and then turns off as the day warms up, the system is functioning perfectly.
  • Defrost cycle activation: Heat pumps occasionally need to melt frost off their outdoor coils. The system will briefly switch to cooling mode to send warm refrigerant outside, while simultaneously turning on the Aux heat indoors so you do not feel cold air blowing through your vents. This is normal.
  • Recovery from a deep setback: If you turn your thermostat down to 60 degrees while you are at work and program it to return to 70 degrees before you get home, the system will likely use Aux heat to make that massive 10-degree jump quickly.

Red Flags That Require Immediate Attention

There are times when continuous emergency heat signals a true malfunction. If you notice any of the following warning signs, it is time to schedule seasonal heat pump maintenance or a diagnostic visit:

  • The system is stuck in auxiliary mode: If the outdoor temperature has risen well above 40 degrees, but your thermostat still says Aux Heat and the outdoor compressor is not running, the heat pump has likely failed.
  • Unusual noises from the outdoor unit: Grinding, shrieking, or heavy clanking sounds from the compressor indicate a mechanical failure. Switch the thermostat to manual Emergency Heat to protect the unit and call a professional.
  • The heat pump fails to turn on entirely: If the fan is blowing but the air is lukewarm, and the outdoor unit is completely silent, the system is relying entirely on backup heat because the primary unit is down.

Before calling for service, always advise checking the thermostat settings to ensure it wasn't manually switched to "Emergency" mode by accident. Someone dusting the hallway or a curious toddler pressing buttons can easily slide the switch over. If it is set to normal "Heat" but the emergency indicators remain on during mild weather, professional diagnostics are essential to prevent further system damage.

Frequently Asked Questions

What is the difference between auxiliary heat and emergency heat?

Auxiliary heat activates automatically to assist your heat pump when temperatures drop, while emergency heat is a manual setting you select. Auxiliary heat runs alongside your heat pump to bridge the temperature gap during cold weather. Emergency heat completely bypasses the outdoor heat pump, shutting it down and relying 100% on your backup heating source, which is usually a gas furnace or electric strips.

Is it normal for emergency heat to come on automatically?

No, true emergency heat should not engage automatically on most standard thermostats. If your screen reads "Aux Heat," that is an automatic and normal response to a drop in temperature. If the screen specifically reads "Emergency Heat" and you did not manually select that setting, it may indicate a wiring issue, a thermostat malfunction, or a hard lockout of the outdoor compressor.

When should I manually switch my thermostat to emergency heat?

You should only manually switch to emergency heat if you know the outdoor heat pump is physically damaged or compromised. Valid reasons include a tree branch crushing the unit, the fan motor failing and making grinding noises, or the entire outdoor cabinet becoming encased in a solid block of ice that the automatic defrost cycle cannot melt.

Is it bad if my heat pump stays on emergency heat for days?

It is not inherently dangerous to your home, but it is highly inefficient and indicates a major problem. If you manually set it to emergency heat, you are bypassing your primary heating system and relying solely on backup heat, which consumes significantly more energy. If it is stuck in this mode automatically, your primary heat pump has likely failed and requires professional repair.

Why does my heat pump say emergency heat when it is not even on?

If the thermostat display shows an emergency heat warning but the system is currently idle, the thermostat setting may have been accidentally toggled to the "EM Heat" mode. Check your thermostat interface and switch it back to the standard "Heat" or "Auto" position. If the warning persists even in the standard heating mode, the thermostat may require recalibration or professional replacement.

Does using auxiliary heat drastically increase my energy bills?

Because auxiliary heat requires a secondary fuel source—whether gas or electric resistance strips—it does consume more energy than the heat pump alone. However, this is a necessary function to maintain indoor comfort during severe cold snaps. Dual-fuel systems mitigate this energy use by relying on a highly efficient gas furnace rather than power-hungry electric strips.

Seeing an emergency or auxiliary heat notification on your thermostat during a late fall deep freeze does not have to cause panic. In most cases, it is a straightforward explanation of heat pump balance points and a built-in safety net doing exactly what it was designed to do. By understanding the clear indicators of normal operation versus actual system failure, you can stay comfortable, protect your equipment, and know exactly when it is time to call the certified HVAC professionals at Mankato Heating & Cooling.

Ready for an honest answer for your home?

Get a free, no-surprise estimate — or have us review a quote you already have, free and with no obligation.

Call Book Free 2nd Opinion